You must completely seal the space between the plates and seal the seam. In this case the repair in the new apartment will not be in vain. Do not fall off and not turn yellow stucco wallpaper. Sealing joints and insulation, as well as all construction work is the final stage work. Preceded by preparatory work sealing the joints.
First, you need to conduct a survey of the building. Need to examine the roof of the building for safe climbing. Develop a plan for work at height. If there is the possibility of fixing the roof on ropes climber, you want to explore these constructions for durability. If there are no structures to secure the rope, you need to mount them on the walls of the building. You can then proceed with the examination of the building. To conduct joint sealing is necessary to study the seams of the building. Filed under: incyte.
How big vnutrishovnoe space. Each sealing seams requires an individual approach. Vnutrishovnuyu cavity can be plastered, if it is a very large (more than 15cm) and open. If vnutrishovnaya cavity is not very big, but it is difficult to access, ie closed stove, in which case the cavity is filled or velatermom foam, and then is sealed seams. Velaterm pave the cavity between the plates. A foam seal the cavity is between the plates through the holes in vilaterme. You can repair joints without autopsy. If the filler in the joint is normal, enough to condense. To do this, holes are 30cm across and fill them through the seam foam. After filling the cavities produced vnutrishovnyh sealing seams. Thermal insulation and sealing joints interpanel buildings is carried out to ensure the tightness of the joint, so that moisture did not penetrate inside and does not form ice. If the sealing of joints made qualitatively, we can be confident that the building will not collapse on climatic influences. We carry insulation and sealing joints on the most advanced technology "Thick seam." The essence of this technology is to produce a tight sealing interpanel space. You must create a blank dense plug between the panels so that the cavities could not leak out and accumulate moisture condensation. Then the walls of your house will retain heat.